Distributed in the UK and Europe
by: WOODY'S IMPORTARIUM
LTD Telephone/Fax 01443
742421 Email: General Information / Sales: firstname.lastname@example.org
"Newly" designed ST1300 shield, all shields
have the NACA aerospace vent built-in for less turbulence and
gives the rider a slight breeze to the helmet area. This also
enhances the laminar flow features by providing a stream of air to
the trailing edge, which helps decrease wind noise. The top edge of
the shield has our "euro" cut feature, which provides increased wind
protection for the upper torso & shoulder area. The windshield
can be ordered up to 6" wider than stock and up to 6"
taller than stock. All shields are thicker than the OEM, D.O.T. approved, and are manufactured from aircraft quality
acrylic in clear, light gray tint, and light green tints.
Prototype windshield shown in picture is 1" taller than stock in
the very center, 2.5" taller than stock at the top left and right
corners, and 1.5" wider than the stock Honda shield.
See samples ...
measured at top dead center, and widths are measured from the top of
the OEM shield. *Production Lead Time is 7-10 days*
Cee Baileys Honda ST1300 screen
st1300screen "Newly" designed ST1300 shield, all shields have the NACA aerospace vent built-in for less turbulence and gives the rider a slight breeze to the helmet area. £159